ASR1000-RP2

ASR1000-RP2

添加时间:2017-09-08 14:33:44

Advanced routing services combined with component monitoring and management come in both modular and fixed form factors.

Product Overview

The Cisco® ASR 1000 Series Route Processors address the stringent route-processing requirements of carrier-grade IP and Multiprotocol Label Switching (MPLS) packet network infrastructures. They are the central control processors that run the network operating system, provide advanced routing capabilities, and also monitor and manage the other components of the Cisco ASR 1000 Series Aggregation Services Router.

Cisco ASR 1000 Series Route Processors fall into two main categories:

   Modular Cisco ASR 1000 Series Route Processors for modular chassis, including the ASR 1004, ASR 1006, ASR 1006-X, ASR 1009-X and ASR 1013 models. These are the Cisco ASR 1000 Series Route Processor 1 (RP1; part number ASR1000-RP1), Cisco ASR 1000 Series Route Processor 2 (RP2; part number ASR1000-RP2), and Cisco ASR 1000 Series Route Processor 3 (RP3; part number ASR1000-RP3)

   Fixed or built-in Cisco ASR 1000 Series Route Processors for fixed chassis, including the ASR 1001, ASR 1001-X, ASR 1002, ASR 1002-F, and ASR 1002-X models. ASR 1002 and ASR 1002-F contain an embedded RP1 (part number ASR1000-RP1).

Table 1 lists the characteristics and chassis support of Cisco ASR 1000 Series RP1, RP2, and RP3.

Table 1.       ASR 1000 Series Route Processors


Modular Route Processors


RP1

RP2

RP3


C78-441072-17_Figure04

C78-441072-17_Figure05

Chassis support

ASR1004

ASR1006

ASR1004, ASR1006, ASR1006-X, ASR1009-X, and ASR1013

ASR1006-X

ASR1009-X

ASR1013

Cisco IOS® XE operating system

32 bit

64 bit

64 bit

CPU

General-purpose CPU based on 1.5-GHz processor

Dual-core processor, 2.66 GHz

Quad-core processor, 2.2 GHz

Memory

4 GB

8 GB (default)

16 GB

8 GB (default)

16 GB

32 GB

64 GB

Built-in eUSB/eMMC bootflash

1 GB (8 GB on ASR 1002)

2 GB

8 GB

Storage

40 GB HDD and external USB

80 GB HDD and external USB

100 GB SSD (default)

200 GB SSD

400 GB SSD

External USB

Features and Benefits

Cisco ASR 1000 Series Route Processors offer the following embedded features:

   Full range of industry-leading Cisco IOS XE Software features and services

   Optional redundant-processor and dual Cisco IOS XE Software support for single-route-processor solutions to improve network resiliency

   Hard disk drive (HDD) or solid state drive (SSD) for code storage, boot, configuration, logs, and so on (HDD or SSD are optional on Cisco ASR 1001, 1001-X, 1001-HX, 1002-X, and 1002-HX)

   USB ports for 1-GB compact flash memory support

   Built-in embedded flash memory (eUSB or eMMC) support:

     1 GB on RP1; 8 GB on the built-in RP1 on the ASR 1002 router partitioned: 1 GB for bootflash; 7 GB for mass storage

     2 GB on RP2; 8 GB on RP3

     8 GB on the built-in route processor on the Cisco ASR 1001, 1001-X and 1002-X, partitioned: 1 GB for bootflash; 7 GB for mass storage

   Field-replaceable and hot-swappable capabilities with modular route processors for minimal service disruption

   Stratum-3 clock circuitry, building integrated timing supply (BITS) input and output (BITS output available on ASR1000-RP2 and on the chassis of ASR1002-X that has a built-in RP)

   Memory scalability up to 4 GB DRAM on the RP1; up to 16 GB DRAM on the RP2, ASR 1001, ASR 1001-X, ASR 1001-HX, ASR 1002-X, and ASR 1002-HX; up to 64 GB DRAM on the RP3

Many additional features are performed in line with routing, including:

   Building and distributing forwarding information to the Cisco ASR 1000 Series Embedded Services Processor (ESP)

   Implementing session border controller (SBC) setup and teardown and applying per-session policies for voice and video streams

   Offering a portal for stateful firewall policy configuration and distribution to the ESP forwarding engine

   Negotiating and maintaining IP Security (IPsec[1]) authentication, encryption methods, and encryption keys (Internet Key Exchange [IKE])

As the management processor for the Cisco ASR 1000 Series Router, the RPs automatically perform the following system management functions:

   Load the operating system software images to all installed line cards upon powering up or through operator commands

   Synchronize the dynamic state conditions for the redundant Cisco IOS XE Software, the route processor, and ESP components

   Perform high-availability failover for redundant solutions

   Provide out-of-band system console and auxiliary ports, USB, and Ethernet ports for router configuration and maintenance

   Allow direct system access through the operating-system kernel if catastrophic Cisco IOS Software failure occurs

   Monitor and manage the power and temperature of system components such as line cards, power supplies, and fans

Table 2 describes features and benefits of the Cisco ASR 1000 Series RP1, RP2, RP3, and built-in RP of the ASR 1001, 1001-X, 1002, 1002-F, and1002-X.

Table 2.       Route Processor Features, Benefits, Descriptions

Feature

Description

Support for Cisco IOS XE Software

Supports a breadth of IP network services, including quality of service (QoS), MPLS, Layer 2 virtual private network (L2VPN), Layer 3 virtual private network (L3VPN), Application Visibility and Control, Performance Routing (PfR), AppNav infrastructure, Data Center Interconnect, Crypto and IPv6

High availability

Provides optional redundant-processor support and dual Cisco IOS Software support for single-route-processor solutions for a highly compact, fully redundant, high-availability solution

Stratum-3 clock circuitry and BITS input ports

Facilitates support of clocking for synchronous services such as SONET and SDH. BITS input ports are available on RP1, RP2 and ASR1002-X only.

Memory scalability of up to 16 GB; up to 64 GB for RP3

Allows pay-as-you-grow scalability so memory can increase as you add more users or features; the scalability offered through memory upgrades includes:

  Routing-table growth  Additional MPLS VPN routing and forwarding instances  Feature additions such as SBC and broadband aggregation (BBA)

Solid state drive support

Allows for greater storage area for code storage, boot, configurations, billing, logs, etc.

USB compact flash support

Allows for easier manageability for code storage, boot, configurations, logs, etc.

Modularity

Offers maximum investment protection and flexibility by allowing customers to upgrade to future Cisco ASR 1000 Series Route Processors

Note: Cisco ASR 1002,and ASR1002-F have an integrated RP1 built into the chassis that is not upgradable.

Note: Cisco ASR 1001, ASR 1001-X, and ASR 1002-X (part numbers ASR 1001, ASR 1001-X, ASR 1002-X) have an integrated RP2 built in to the chassis that is not upgradable.

Architecture

All platforms use an innovative and powerful processor: the Cisco QuantumFlow Processor (QFP). The QFP combines a high-performance forwarding engine with the service flexibility of the general-purpose processor. It is the industry's first fully integrated and programmable flow processor designed to unify massive parallel processing, integrated quality of service (QoS), and advanced memory management while offering integral service delivery and programmability.

The Cisco ASR 1000 Series consists of:

   ASR 1001 (end of sale)

   ASR 1001-X

   ASR 1001-HX

   ASR 1002 (end of sale)

   ASR 1002-X

   ASR 1002-HX

   ASR 1004

   ASR 1006

   ASR 1006-X

   ASR 1009-X

   ASR 1013

The Cisco ASR 1001, 1001-X, 1002 Fixed (1002-F), 1002, and 1002-X have integrated route processors. The ASR 1004 has a single slot for one route processor. The route processor has a dual Cisco IOS Software option that allows these routers to use the Cisco industry-leading high-availability features, Cisco IOS Software redundancy, Integrated Software Service Upgrade (ISSU), and Nonstop Forwarding (NSF). These features require the Cisco ASR 1000 Series RP1 to have 4 GB of DRAM memory. The Cisco ASR 1000 Series RP2 and RP3 support Cisco IOS Software redundancy, ISSU, and NSF with its default memory of 8 GB of DRAM. The built-in route processor of the Cisco ASR 1001, 1001-X, and 1002-X supports Cisco IOS Software redundancy and NSF with 4 GB of DRAM default memory on the ASR 1001 and 1002-X and 8 GB of DRAM default on the ASR 1001-X.

The Cisco ASR 1006, 1006-X, 1009-X, and 1013 routers support fully redundant route processors that allow for full route-processor hardware redundancy, ISSU, NSF, and route-processor service upgrades.

Table 3 specifies some of the architectural aspects of the ASR 1000 Series Route Processors.

Table 3.       Architectural Specifications

Item

Details

LAN ports

The Cisco ASR 1000 Series RP1, RP2, and RP3 have a single copper (RJ-45) 10/100/1000 management Ethernet port.

For ASR 1001, 1001-X, 1001-HX, 1002, 1002-F, 1002-X, and 1002-HX, the single copper (RJ-45) 10/100/1000 management Ethernet ports are built into the chassis.

SDRAM

The Cisco ASR 1000 Series RP1 can support either 2 or 4 GB of synchronous dynamic RAM (SDRAM). Because the card holds 2 SDRAM slots, a route processor with 2 GB can hold two 1-GB dual in-line memory modules (DIMMs), whereas a route processor with 4 GB can hold two 2-GB DIMMs.

The Cisco ASR 1000 Series RP2 can support either 8 or 16 GB of SDRAM. Because the card holds 4 SDRAM slots, a route processor with 8 GB can hold four 2-GB DIMMs, whereas a route processor with 16 GB can hold four 4-GB DIMMs.

The Cisco ASR 1000 Series RP3 can support either 8, 16, 32, or 64 GB of SDRAM.

The Cisco ASR 1001 and 1002-X built-in route processors support 4, 8, or 16 GB of SDRAM. The Cisco ASR 1001-X built-in route processor supports either 8 GB or 16 GB of SDRAM.

Hard disk drive (HDD)

The Cisco ASR 1000 Series RP1 and RP2 have a HDD for code storage, system configurations, and log files. The RP1 provides a 40-GB HDD mounted on the board itself. The RP1 HDD is field-replaceable, but not hot-swappable. The RP2 provides an 80-GB HDD that is front-mounted, field-replaceable, and hot-swappable. The RP3 provides a 100-GB SSD by default, which is upgradable to 200-GB or 400-GB. The Cisco ASR 1001, 1001-X, 1002, 1002-F, and 1002-X support built-in embedded USB (eUSB) 8 GB memory for code storage, system configurations, and log files. The ASR 1001-X supports an optional solid state drive, and the ASR 1002-X supports an optional HDD for additional code storage, system configurations, and log files.

Solid state drive (SSD)

The Cisco ASR 1001-X supports an optional SSD for additional code storage, system configurations, and log files.

USB port

One USB port is provided on the Cisco ASR 1000 Series RP1, and 2 ports are provided on the RP2 and RP3. All three route processors support 1-GB USB compact flash memory for the storage and portability of operating system software, system configurations, and log files.

Console and auxiliary ports

The Cisco ASR 1000 Series RP1, RP2, and RP3have built-in console and auxiliary ports. The ASR 1001, 1001-X, 1002, 1002-F, and 1002-X have built-in console and auxiliary ports on their respective chassis.

General Product Specifications

Tables 4, 5, and 6 provide specifications for the Cisco ASR 1000 Series RP1, RP2, and RP3, respectively. Tables 7 and 8 provide specifications for the Cisco ASR 1001 and ASR 1001-X integrated route processors, respectively, and Table 9 provides Cisco ASR 1002-X route processor specifications.

Table 4.       Cisco ASR 1000 Series RP1 Product Specifications

Item

Details

Chassis support

Cisco ASR 1004 and ASR 1006 chassis

(Note: The Cisco ASR 1002 chassis comes with the Cisco ASR 1000 Series RP1 built into the chassis.)

(Note: Cisco ASR 1001, ASR 1001-X, and ASR 1002-X (part numbers ASR1001, ASR1001-X, ASR1002-X) have an integrated Route Processor built in to the chassis that is not upgradable)

Software compatibility

Cisco IOS XE Operating System, which is based on Cisco IOS Software Release 12.2SR
(Please consult your Cisco account representative for additional details.)

Software protocols

Refer to Cisco IOS Software 12.2SR protocol support

Connectivity

  Console port (RJ-45 connector)  Auxiliary port (RJ-45 connector)  10/100/1000 Ethernet port (RJ-45 connector)  Two RJ-48 connectors for BITS input clocks

Memory options

  Two 1-GB Double Data Rate 2 (DDR2) mini-DIMMs  Two 2-GB DDR2 mini-DIMMs  Upgradable memory from 2-GB to 4-GB DRAM

Storage options

  40-GB HDD (RP1 only)  1-GB USB Compact Flash memory

Performance

  Scalability up to 1,000,000 IPv4 routes or 500,000 IPv6 routes  BGP RR Scalability up to 5,000,000 IPv4 routes or 3,000,000 IPv6 routes

Reliability and availability

  1 + 1 redundancy in dual-route-processor configuration  Support for online insertion and removal (OIR)  Support for NSF and Stateful Switchover (SSO)  Support for ISSU

MIBs

  RFC 2737 compliant

Network management

  Telnet and Secure Shell (SSH) Protocol (command-line interface [CLI])  Console port (through the CLI)  Simple Network Management Protocol (SNMP)  RFC 2665

LEDs

  PWR - PowerGreen - All power rails are within specifications  STAT - StatusGreen - Cisco IOS Software has bootedYellow - BootROM has successfully loadedRed - System failure or during boot process  ACTV- ActiveGreen - Active route processor  STBY - StandbyYellow - Standby route processor  CRIT - CriticalRed - Critical alarm or during boot process  MAJ - MajorRed - Major alarm  MIN - MinorAmber - Minor alarm  LINK - Management Ethernet link statusSolid green - Link with no activityFLASH green - Link with activityOff - No link  DISK0 - Internal Compact FlashFLASH Green - Activity indicatorOff - No activity  DISK1 - External Compact Flash
FLASH green - Activity indicator
Off - No activity  DISK2 - Internal HDD
FLASH green - Activity indicator
Off - No activity  CARRIER - BITS interface
Off - Out of service
Green - In frame and in service
Amber - Fault or loop condition

Physical dimensions
(H x W x D)

0.92 x 16.7 x 14.19 in. (0.02 x 0.428 x 0.36m)

Weight

5.0 lb (2.3 kg)

Approvals and compliance

Safety

  UL60950-1 and CAN/CSA-C22.2 No. 60950-1-03 Information technology equipment  AS/NZS 60950-1  IEC/EN 60950-1 Information technology equipment  73/23/EEC

Electromagnetic Emissions Certification

  AS/NZ 3548: 1995 (including AMD I + II) Class B  EN55022: 1998 Class B  CISPR 22: 1997  EN55022: 1994 (including AMD I + II)  47 CFR Part 15: 2000 (FCC) Class B  VCCI V-3/01.4 Class 2  CNS-13438: 1997 Class B  GR1089: 1997 (including Rev. 1: 1999)

Immunity

  EN300386: 2000-TNE EMC requirements; product family standard; high priority of service; central office and noncentral office locations  EN50082-1: 1992/1997  EN50082-2: 1995-Generic Immunity Standard, Heavy

Industrial

  CISPR24: 1997  EN55024: 1998-Generic ITE immunity standard  EN61000-4-2: 1995 + AMD I + II ESD, Level 4/8 kV contact, 15 kV air  IEC-1000-4-3: 1995 + AMD 1-Radiated Immunity, 10 V/m  IEC-1000-4-4: 1995-Electrical Fast Transients, Level 4/4 kV/B  IEC-1000-4-5: 1995 + AMD 1-DC Surge-Class 3; AC Surge-Class 4  EN61000-4-6: 1996 + AMD 1-RF conducted immunity, 10 Vrms  EN61000-4-11: 1995-Voltage Dips and Sags  ETS300 132-2: 1996 + corrigendum, December 1996  GR1089:1997 (including Rev1: 1999)

Network Equipment Building Standards

The module meets the following Networking Equipment Building Standards (NEBS):

  GR-1089-CORE  GR-63-CORE

European Telecommunication Standards Institute (ETSI)

  ETSI 300 386-1 - Levels for equipment with a "high priority of service" that is installed in "locations other than telecommunication centers"  ETSI 300 386-2:1997 - Levels for equipment with a "high priority of service" that is installed in "locations other than telecommunication centers"  ETSI 300 132-2: December 1994 - Power supply interfaces at the input to telecommunications equipment Sections 4.8 and 4.9

Environmental

  Storage temperature: -38 to 150°F (-40 to 70°C)  Operating temperature, nominal: 41 to 104°F (5 to 40°C)  Operating temperature, short-term: 23 to 131°F (-5 to 55°C)  Storage relative humidity: 5 to 95% relative humidity (RH)  Operating humidity, nominal: 5 to 85% RH  Operating humidity, short-term: 5 to 90% RH  Operating altitude: -60 to 4000m (up to 2000m conforms to IEC/EN/UL/CSA 60950 requirements)

Table 5.       Cisco ASR 1000 Series RP2 Product Specifications

Item

Details

Chassis support

Cisco ASR 1004, ASR 1006, ASR 1006-X, ASR 1009-X and ASR 1013 chassis

(Note: The Cisco ASR 1002 and ASR 1002 Fixed chassis come with the Cisco ASR 1000 Series RP1 built into the chassis.)

(Note: Cisco ASR 1001, ASR 1001-X, and ASR 1002-X (part numbers ASR1001, ASR1001-X, ASR1002-X) have an integrated Route Processor built in to the chassis that is not upgradable)

Software compatibility

Cisco IOS XE Software, which is based on Cisco IOS Software Release 12.2SR

(Please consult your Cisco account representative for additional details.)

Software protocols

Refer to Cisco IOS Software 12.2SR protocol support

Connectivity

  Console port (RJ-45 connector)  Auxiliary port (RJ-45 connector)  10/100/1000 Ethernet port (RJ-45 connector)  RJ-48 connector for BITS input clock and output source

Memory options

  Four 2-GB DDR2 mini-DIMMs  Four 4 GB DDR2 mini-DIMMs  Upgradable memory from 8-GB to 16-GB DRAM

Storage options

  80-GB HDD (hot-swappable)  1-GB USB Compact Flash memory

Performance

With 8-GB memory:

  Up to 1,000,000 IPv4 routes or 1,000,000 IPv6 routes  BGP RR Scalability up to 8,000,000 IPv4 routes or 6,000,000 IPv6 routes

With 16-GB memory:

  Up to 4,000,000 IPv4 routes or 4,000,000 IPv6 routes  BGP RR Scalability up to 24,000,000 IPv4 routes or 17,000,000 IPv6 routes

Reliability and availability

  1 + 1 redundancy in dual-route-processor configuration  Support for OIR  Support for NSF and SSO  Support for ISSU

MIBs

  RFC 2737 compliant

Network management

  Telnet and SSH (CLI)  Console port (through the CLI)  SNMP  RFC 2665

LEDs

  PWR - PowerGreen - All power rails are within specifications  STAT - StatusGreen - Cisco IOS Software has bootedYellow - BootROM has successfully loadedRed - System failure or during boot process  ACTV- ActiveGreen - Active route processor  STBY - StandbyYellow - Standby route processor  CRIT - Critical AlarmRed - Critical alarm or during boot process  MAJ - Major AlarmRed - Major alarm  MIN - Minor AlarmAmber - Minor alarm  HD - Internal HDDFLASH Green - Activity indicatorOff - No activity  USB - External Compact FlashFLASH green - Activity indicator  BF - Boot Flash (Internal)FLASH green - Activity indicatorOff - No activity  CARRIERBITS I/F ModeOff - Out of service or not configuredGreen - Normal or BridgingAmber - Fast  DTI Mode
Off - Warm-up, free-run, or holdover
Green - In service or working properly
Amber - Fault or loop condition  LINK - Management Ethernet link status
Solid green - Link with no activity
FLASH green - Link with activity
Off - No link  DISK2 - Internal HDD
FLASH green - Activity indicator
Off - No activity  CARRIER - BITS interface
Off - Out of service
Green - In frame and in service
Amber - Fault or loop condition

Physical dimensions (H x W x D)

0.92 x 16.7 x 14.19 in. (0.02 x 0.428 x 0.36m)

Weight

5.0 lb (2.3 kg)

Approvals and compliance

Safety

  UL60950-1 and CAN/CSA-C22.2 No. 60950-1-03 Information technology equipment  AS/NZS 60950-1  IEC/EN 60950-1 Information technology equipment  73/23/EEC

Electromagnetic Emissions Certification

  CFR 47 Part 15: (FCC) Class A  ICES 003 Class A  AS/NZ CISPR 22: Class A  CISPR 22 (EN55022) Class A  VCCI Class A  KN22  IEC/EN 61000-3-2 (or 3-12 as applicable): AC Power Line Harmonics  IEC/EN 61000-3-3 (or 3-11 as applicable): AC Voltage Fluctuations and Flicker

Immunity

  IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8-kV Contact, 15-kV Air)  IEC/EN-61000-4-3: Radiated Immunity (10 V/m)  IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2-kV Power, 1-kV Signal)  IEC/EN-61000-4-5: Surge AC Port (4-kV CM, 2-kV DM)  IEC/EN-61000-4-5: Surge Signal Ports (1-kV indoor, 2-kV outdoor)  IEC/EN-61000-4-5: Surge DC Port 1-kV  IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms)  IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30 A/m)  IEC/EN-61000-4-11: Voltage Dips, Short Interruptions, and Voltage Variations

Network Equipment Building Standards

The module meets the following NEBS:

  GR-1089-CORE  GR-63-CORE

ETSI and EN Standards

  EN300 386: Telecommunications Network Equipment (EMC), OTC  EN55022: Information Technology Equipment (Emissions)  EN55024: Information Technology Equipment (Immunity)  EN50082-1/EN-61000-6-1: 1995-Generic Immunity Standard

Environmental

  Storage temperature: -38 to 150°F (-40 to 70°C)  Operating temperature, nominal: 41 to 104°F (5 to 40°C)  Operating temperature, short-term: 23 to 131°F (-5 to 55°C)  Storage relative humidity: 5 to 95% RH  Operating humidity, nominal: 5 to 85% RH  Operating humidity, short-term: 5 to 90% RH  Operating altitude: -60 to 4000m (up to 2000m conforms to IEC/EN/UL/CSA 60950 requirements)

Table 6.       Cisco ASR 1000 Series RP3 Product Specifications

Item

Details

Chassis support

Cisco ASR 1006-X, 1009-X, and 1013 chassis

Software compatibility

Minimum Cisco IOS XE 16.3.1 Software

(Please consult your Cisco account representative for additional details.)

Software protocols

Refer to Cisco IOS XE 16.3.1 and later versions for protocol support

Connectivity

  Console port (RJ-45 connector)  Auxiliary port (RJ-45 connector)  10/100/1000 Ethernet port (RJ-45 connector)  RJ-48 connector for BITS input clock and output source

Memory options

  8-GB memory default; upgradable to 16-GB, 32-GB, or 64-GB memory

Storage options

  100-GB SSD (hot-swappable); upgradable to 200-GB or 400-GB SSD  1-GB USB compact flash memory

Performance

With 8-GB memory:

  Up to 1,000,000 IPv4 routes or 1,000,000 IPv6 routes  BGP RR scalability up to 8,000,000 IPv4 routes or 6,000,000 IPv6 routes

With 16-GB memory:

  Up to 4,000,000 IPv4 routes or 4,000,000 IPv6 routes  BGP RR scalability up to 24,000,000 IPv4 routes or 17,000,000 IPv6 routes

Reliability and availability

  1 + 1 redundancy in dual-route-processor configuration  Support for OIR  Support for NSF and SSO  Support for ISSU

MIBs

  RFC 2737 compliant

Network management

  Telnet and SSH (CLI)  Console port (through the CLI)  SNMP  RFC 2665

LEDs

  PWR - PowerGreen - All power rails are within specifications  STAT - StatusGreen - Cisco IOS Software has bootedYellow - BootROM has successfully loadedRed - System failure or during boot process  ACTV- ActiveGreen - Active route processor  STBY - StandbyYellow - Standby route processor  CRIT - Critical alarmRed - Critical alarm or during boot process  MAJ - Major alarmRed - Major alarm  MIN - Minor alarmAmber - Minor alarm  HD - Internal HDDFLASH Green - Activity indicatorOff - No activity  USB - External compact flashFLASH green - Activity indicator  BF - Boot flash (Internal)FLASH green - Activity indicatorOff - No activity  CARRIERBITS I/F ModeOff - Out of service or not configuredGreen - Normal or bridgingAmber - Fast  DTI ModeOff - Warm-up, free-run, or holdoverGreen - In service or working properlyAmber - Fault or loop condition  LINK - Management Ethernet link statusSolid green - Link with no activityFLASH green - Link with activityOff - No link  DISK2 - Internal HDDFLASH green - Activity indicatorOff - No activity  CARRIER - BITS interfaceOff - Out of serviceGreen - In frame and in serviceAmber - Fault or loop condition

Physical dimensions

(H x W x D)

0.92 x 16.7 x 14.19 in. (0.02 x 0.428 x 0.36m)

Weight

7 lb (3.2 kg)

Approvals and compliance

Safety

  UL60950-1 and CAN/CSA-C22.2 No. 60950-1-03 Information technology equipment  AS/NZS 60950-1  IEC/EN 60950-1 Information technology equipment  73/23/EEC

Electromagnetic Emissions Certification

  CFR 47 Part 15: (FCC) Class A  ICES 003 Class A  AS/NZ CISPR 22: Class A  CISPR 22 (EN55022) Class A  VCCI Class A  KN22  IEC/EN 61000-3-2 (or 3-12 as applicable): AC Power Line Harmonics  IEC/EN 61000-3-3 (or 3-11 as applicable): AC Voltage Fluctuations and Flicker

Immunity

  IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8-kV Contact, 15-kV Air)  IEC/EN-61000-4-3: Radiated Immunity (10 V/m)  IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2-kV Power, 1-kV Signal)  IEC/EN-61000-4-5: Surge AC Port (4-kV CM, 2-kV DM)  IEC/EN-61000-4-5: Surge Signal Ports (1-kV indoor, 2-kV outdoor)  IEC/EN-61000-4-5: Surge DC Port 1-kV  IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms)  IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30 A/m)  IEC/EN-61000-4-11: Voltage Dips, Short Interruptions, and Voltage Variations

Network Equipment Building Standards

The module meets the following NEBS:

  GR-1089-CORE  GR-63-CORE

ETSI and EN Standards

  EN300 386: Telecommunications Network Equipment (EMC), OTC  EN55022: Information Technology Equipment (Emissions)  EN55024: Information Technology Equipment (Immunity)  EN50082-1/EN-61000-6-1: 1995-Generic Immunity Standard

Environmental

  Storage temperature: -38 to 150°F (-40 to 70°C)  Operating temperature, nominal: 41 to 104°F (5 to 40°C)  Operating temperature, short-term: 23 to 131°F (-5 to 55°C)  Storage relative humidity: 5 to 95% RH  Operating humidity, nominal: 5 to 85% RH  Operating humidity, short-term: 5 to 90% RH  Operating altitude: -60 to 4000m (up to 2000m conforms to IEC/EN/UL/CSA 60950 requirements)

Table 7.       Cisco ASR 1001 Integrated Route Processor Product Specifications

Item

Details

Chassis support

Cisco ASR 1001 chassis

Software compatibility

Cisco IOS XE Software Release 3.2.0S and later versions

Software protocols

Refer to Cisco IOS XE 3.2.0S and later versions for protocol support

Connectivity

Not applicable - route processor is integrated inside the chassis

Memory options

  Cisco ASR 1001 ships with 4-GB memory by default. It can be upgraded to 8- or 16-GB memory  Cisco ASR 1001 has 4 DRAM memory slots, which can take either 2- or 4-GB DRAM each  When shipped with 4-GB DRAM (M-ASR1K-1001-4 GB), 2 slots are filled with 2 GB each  When shipped with 8-GB DRAM (M-ASR1K-1001-8 GB), 4 slots are filled with 2 GB each  When shipped with 16-GB DRAM (M-ASR1K-1001-16 GB), 4 slots are filled with 4 GB each

Storage options

  8-GB eUSB is partitioned as two 32-MB of memory for nonvolatile RAM (NVRAM) and the rest for mass storage  The Cisco ASR 1001-HDD model includes 160-GB HDD for storage

Performance

With 4-GB memory:

  Up to 500,000 IPv4 or 500,000 IPv6 routes

With 8-GB or 16-GB memory:

  Up to 1,000,000 IPv4 or 1,000,000 IPv6 routes  BGP RR Scalability up to 5,250,000 IPv4 or 4,250,000 IPv6 routes - 8 GB Memory  BGP RR Scalability up to 11,500,000 IPv4 or 10,000,000 IPv6 routes - 16 GB Memory

Reliability and availability

  No route-processor hardware redundancy  Software redundancy available (requires software redundancy license and 8-GB memory)

MIBs

  RFC 2737 compliant

Network management

  Telnet and SSH Protocol (CLI)  Console port (through the CLI)  SNMP  RFC 2665

LEDs

  PWR - Power
Green - All power rails are within specifications  STAT - Status
Green - Cisco IOS Software has booted
Yellow - BootROM has successfully loaded
Red - System failure or during boot process  ACTV- Active
Green - Active route processor  STBY - Standby
Yellow - Standby route processor  CRIT - Critical Alarm
Red - Critical alarm or during boot process  MAJ - Major Alarm
Red - Major alarm  MIN - Minor Alarm
Amber - Minor alarm  HD - Internal HDD
FLASH Green - Activity indicator
Off - No activity  USB - External Compact Flash
FLASH green - Activity indicator  BF - Boot Flash (Internal)
FLASH green - Activity indicator
Off - No activity  CARRIER
BITS I/F Mode
Off- Out of service or not configured
Green - Normal or Bridging
Amber - Fast  DTI Mode
Off- Warm-up, free-run, or holdover
Green - In service or working properly
Amber - Fault or loop condition  LINK - Management Ethernet link status
Solid green - Link with no activity
FLASH green - Link with activity
Off - No link  DISK2 - Internal HDD
FLASH green - Activity indicator
Off - No activity  CARRIER - BITS interface
Off - Out of service
Green - In frame and in service
Amber - Fault or loop condition

Approvals and compliance

Safety

  UL60950-1 and CAN/CSA-C22.2 No. 60950-1-03 Information technology equipment  AS/NZS 60950-1  IEC/EN 60950-1 Information technology equipment  73/23/EEC

Electromagnetic Emissions Certification

  CFR 47 Part 15: (FCC) Class A  ICES 003 Class A  AS/NZ CISPR 22: Class A  CISPR 22 (EN55022) Class A  VCCI Class A  KN22  IEC/EN 61000-3-2 (or 3-12 as applicable): AC Power Line Harmonics  IEC/EN 61000-3-3 (or 3-11 as applicable): AC Voltage Fluctuations and Flicker

Immunity

  IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8-kV Contact, 15-kV Air)  IEC/EN-61000-4-3: Radiated Immunity (10 V/m)  IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2-kV Power, 1-kV Signal)  IEC/EN-61000-4-5: Surge AC Port (4-kV CM, 2-kV DM)  IEC/EN-61000-4-5: Surge Signal Ports (1-kV indoor, 2-kV outdoor)  IEC/EN-61000-4-5: Surge DC Port 1-kV  IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms)  IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30 A/m)  IEC/EN-61000-4-11: Voltage Dips, Short Interruptions, and Voltage Variations

ETSI and EN Standards

  EN300 386: Telecommunications Network Equipment (EMC), OTC  EN55022: Information Technology Equipment (Emissions)  EN55024: Information Technology Equipment (Immunity)  EN50082-1/EN-61000-6-1: 1995-Generic Immunity Standard

Environmental

  Storage temperature: -38 to 150°F (-40 to 70°C)  Operating temperature, nominal: 41 to 104°F (5 to 40°C)  Operating temperature, short-term: 23 to 131°F (-5 to 55°C)  Storage relative humidity: 5 to 95% RH  Operating humidity, nominal: 5 to 85% RH  Operating humidity, short-term: 5 to 90% RH  Operating altitude: -60 to 4000m (up to 2000m conforms to IEC/EN/UL/CSA 60950 requirements)

Table 8.       Cisco ASR 1001-X Integrated Route Processor Product Specifications

Item

Details

Chassis support

Cisco ASR 1001-X chassis

Software compatibility

Cisco IOS XE Software Release 3.12.0S and later versions

Software protocols

Refer to Cisco IOS XE 3.12.0S and later versions for protocol support

Connectivity

Not applicable - route processor is integrated inside the chassis

Memory options

  Cisco ASR 1001-X ships with 8-GB memory by default. It can be upgraded 16-GB memory  Cisco ASR 1001-X has 2 DRAM memory slots, which can take either 4- or 8-GB DRAM each  When shipped with 8-GB DRAM (M-ASR1001X-8 GB), 2 slots are filled with 4 GB each  When shipped with 16-GB DRAM (M-ASR1001X-16 GB), 2 slots are filled with 8 GB each

Storage options

  8-GB eUSB is partitioned as two 32-MB of memory for nonvolatile RAM (NVRAM) and the rest for mass storage  The Cisco ASR 1001-Xl includes an optional SSD-SATA-200G, SSD-SATA-400G for storage

Performance

With 8-GB or 16-GB memory:

  Up to 1,000,000 IPv4 or 1,000,000 IPv6 routes - 8 GB Memory  Up to 3,500,000 IPv4 or 3,000,000 IPv6 routes - 16 GB Memory  BGP RR Scalability up to 5,250,000 IPv4 or 4,250,000 IPv6 routes - 8 GB Memory  BGP RR Scalability up to 11,500,000 IPv4 or 10,000,000 IPv6 routes - 16 GB Memory

Reliability and availability

  No route-processor hardware redundancy  Software redundancy available (requires software redundancy license and 8-GB memory)

MIBs

  RFC 2737 compliant

Network management

  Telnet and SSH Protocol (CLI)  Console port (through the CLI)  SNMP  RFC 2665

LEDs

  PWR – PowerGreen - All power rails are within specifications  STAT – StatusGreen - Cisco IOS Software has booted
Yellow - BootROM has successfully loaded
Red - System failure or during boot process  ACTV- Active
Green - Active route processor  STBY - Standby
Yellow - Standby route processor  CRIT - Critical Alarm
Red - Critical alarm or during boot process  MAJ - Major Alarm
Red - Major alarm  MIN - Minor Alarm
Amber - Minor alarm  HD - Internal HDD
FLASH Green - Activity indicator
Off - No activity  USB - External Compact Flash
FLASH green - Activity indicator  BF - Boot Flash (Internal)
FLASH green - Activity indicator
Off - No activity  CARRIER
BITS I/F Mode
Off- Out of service or not configured
Green - Normal or Bridging
Amber - Fast  DTI Mode
Off- Warm-up, free-run, or holdover
Green - In service or working properly
Amber - Fault or loop condition  LINK - Management Ethernet link status
Solid green - Link with no activity
FLASH green - Link with activity
Off - No link  DISK2 - Internal HDD
FLASH green - Activity indicator
Off - No activity  CARRIER - BITS interface
Off - Out of service
Green - In frame and in service
Amber - Fault or loop condition

Approvals and compliance

Safety

  UL60950-1 and CAN/CSA-C22.2 No. 60950-1-03 Information technology equipment  AS/NZS 60950-1  IEC/EN 60950-1 Information technology equipment  73/23/EEC

Electromagnetic Emissions Certification

  CFR 47 Part 15: (FCC) Class A  ICES 003 Class A  AS/NZ CISPR 22: Class A  CISPR 22 (EN55022) Class A  VCCI Class A  KN22  IEC/EN 61000-3-2 (or 3-12 as applicable): AC Power Line Harmonics  IEC/EN 61000-3-3 (or 3-11 as applicable): AC Voltage Fluctuations and Flicker

Immunity

  IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8-kV Contact, 15-kV Air)  IEC/EN-61000-4-3: Radiated Immunity (10 V/m)  IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2-kV Power, 1-kV Signal)  IEC/EN-61000-4-5: Surge AC Port (4-kV CM, 2-kV DM)  IEC/EN-61000-4-5: Surge Signal Ports (1-kV indoor, 2-kV outdoor)  IEC/EN-61000-4-5: Surge DC Port 1-kV  IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms)  IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30 A/m)  IEC/EN-61000-4-11: Voltage Dips, Short Interruptions, and Voltage Variations

ETSI and EN Standards

  EN300 386: Telecommunications Network Equipment (EMC), OTC  EN55022: Information Technology Equipment (Emissions)  EN55024: Information Technology Equipment (Immunity)  EN50082-1/EN-61000-6-1: 1995-Generic Immunity Standard

Environmental

  Storage temperature: -38 to 150°F (-40 to 70°C)  Operating temperature, nominal: 32 to 104°F (0 to 40°C)  Operating temperature, short-term: 32 to 131°F (0 to 55°C)  Storage relative humidity: 5 to 95% RH  Operating humidity, nominal: 10 to 90% RH  Operating humidity, short-term: 5 to 95% RH  Operating altitude: -60 to 4000m (up to 2000m conforms to IEC/EN/UL/CSA 60950 requirements)

Table 9.       Cisco ASR 1002-X Integrated Route Processor Product Specifications

Item

Details

Chassis support

Cisco ASR 1002-X chassis

Software compatibility

Cisco IOS XE Software Release 3.7.0S and later versions

Software protocols

Refer to Cisco IOS XE 3.7.0S and later versions for protocol support

Connectivity

Not applicable - route processor is integrated inside the chassis

Memory options

  Cisco ASR 1002-X ships with 4-GB memory by default. It can be upgraded to 8- or 16-GB memory  Cisco ASR 1002-X has 4 DRAM memory slots, which can take either 2- or 4-GB DRAM each  When shipped with 4-GB DRAM (M-ASR1002X-4 GB), 2 slots are filled with 2 GB each  When shipped with 8-GB DRAM (M-ASR1002X-8 GB), 4 slots are filled with 2 GB each  When shipped with 16-GB DRAM (M-ASR1002X-16 GB), 4 slots are filled with 4 GB each

Storage options

  8-GB eUSB memory is partitioned as two 32-MB of memory for NVRAM and the rest for mass storage  The Cisco ASR 1002-X has an optional 160-GB HDD for storage

Performance

With 4-GB memory:

  Up to 500,000 IPv4 or 500,000 IPv6 routes

With 8-GB or 16-GB memory:

  Up to 1,000,000 IPv4 or 1,000,000 IPv6 routes - 8 GB Memory  Up to 3,500,000 IPv4 or 3,000,000 IPv6 routes - 16 GB Memory  BGP RR Scalability up to 5,250,000 IPv4 or 4,250,000 IPv6 routes - 8 GB Memory  BGP RR Scalability up to 11,500,000 IPv4 or 10,000,000 IPv6 routes - 16 GB Memory

Reliability and availability

  No route-processor hardware redundancy  Software redundancy available (requires software redundancy license and 8-GB memory)

MIBs

  RFC 2737 compliant

Network management

  Telnet and SSH Protocol (CLI)  Console port (through the CLI)  SNMP  RFC 2665

LEDs

  PWR – Power
Green - All power rails are within specifications  STAT - Status
Green - Cisco IOS Software has booted
Yellow - BootROM has successfully loaded
Red - System failure or during boot process  CRIT - Critical Alarm
Red - Critical alarm or during boot process  MAJ - Major Alarm
Red - Major alarm  MIN - Minor Alarm
Amber - Minor alarm  LINK - Management Ethernet link status
Solid green - Link with no activity
FLASH green - Link with activity
Off - No link  BOOT
FLASH Green - Activity indicator
Off - No activity  BITS
Off- Out of service or not configured
Green - In frame and In service
Amber - Fault condition  HDD
FLASH green - Activity indicator  GPS
Off- Port not connected
Green - In service or working properly
Amber - Fault condition

Approvals and compliance

Safety

  UL60950-1 and CAN/CSA-C22.2 No. 60950-1-03 Information technology equipment  AS/NZS 60950-1  IEC/EN 60950-1 Information technology equipment  73/23/EEC

Electromagnetic Emissions Certification

  CFR 47 Part 15: (FCC) Class A  ICES 003 Class A  AS/NZ CISPR 22: Class A  CISPR 22 (EN55022) Class A  VCCI Class A  KN22  IEC/EN 61000-3-2 (or 3-12 as applicable): AC Power Line Harmonics  IEC/EN 61000-3-3 (or 3-11 as applicable): AC Voltage Fluctuations and Flicker

Immunity

  IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8-kV Contact, 15-kV Air)  IEC/EN-61000-4-3: Radiated Immunity (10 V/m)  IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2-kV Power, 1-kV Signal)  IEC/EN-61000-4-5: Surge AC Port (4-kV CM, 2-kV DM)  IEC/EN-61000-4-5: Surge Signal Ports (1-kV indoor, 2-kV outdoor)  IEC/EN-61000-4-5: Surge DC Port 1-kV  IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms)  IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30 A/m)  IEC/EN-61000-4-11: Voltage Dips, Short Interruptions, and Voltage Variations

Network Equipment Building Standards

The module meets the following NEBS:

  GR-1089-CORE  GR-63-CORE

ETSI and EN Standards

  EN300 386: Telecommunications Network Equipment (EMC), OTC  EN55022: Information Technology Equipment (Emissions)  EN55024: Information Technology Equipment (Immunity)  EN50082-1/EN-61000-6-1: 1995-Generic Immunity Standard

Environmental

  Storage temperature: -38 to 150°F (-40 to 70°C)  Operating temperature, nominal: 41 to 104°F (5 to 40°C)  Operating temperature, short-term: 23 to 131°F (-5 to 55°C)  Storage relative humidity: 5 to 95% relative humidity (RH)  Operating humidity, nominal: 5 to 85% RH  Operating humidity, short-term: 5 to 90% RH  Operating altitude: -60 to 4000m (up to 2000m conforms to IEC/EN/UL/CSA 60950 requirements)

* Route-reflector numbers were tested with the BGP selective download feature for IPv4 and IPv6 for dedicated RR application. This feature prevents IPv4 and IPv6 BGP routes from being installed in the Routing Information Base (RIB) and Forwarding Information Base (FIB). It reduces memory usage per IPv4 and IPv6 prefix and CPU usage.

System Requirements

Table 10 specifies the system requirements of the Cisco ASR 1000 Series RP1, RP2, and RP3. For ordering information, refer to Table 11.

Table 10.     Cisco ASR 1000 Series RP1, RP2, and RP3 System Requirements

Item

Details

Hardware

Cisco ASR 1000 Series RP1

  Cisco ASR 1004 and 1006

Cisco ASR 1000 Series RP2

  Cisco ASR 1004, 1006, 1006-X, 1009-X, and 1013

Cisco ASR 1000 Series RP3

  Cisco ASR 1006-X, 1009-X, and 1013

Memory

Cisco ASR 1000 Series RP1

  4 GB (default for RP1)

Cisco ASR 1000 Series RP2

  8 GB (default for RP2)  16 GB (maximum RP2)

Note: Memory is field-upgradable from 8 to 16 GB.

Cisco ASR 1000 Series RP3

  8 GB (default for RP3)  16 GB  32 GB  64 GB (maximum for RP3)

Note: Memory is field-upgradable from 8 to 64 GB.

Minimum software release

Cisco ASR 1000 Series RP1

  Cisco IOS XE Software Release 2.1.0

Cisco ASR 1000 Series RP2

  Cisco IOS XE Software Release 2.3.0

Cisco ASR 1000 Series RP3

  Cisco IOS XE Software Release 16.3.1

Table 11.     Ordering Information

Part Number

Product Name

Cisco ASR 1000 Series Route Processor 1

ASR1000-RP1

Cisco ASR1000 Series Route Processor 1

ASR1000-RP1=

Cisco ASR1000 Series Route Processor 1, Spare

Cisco ASR 1000 Series Route Processor 2

ASR1000-RP2

Cisco ASR1000 Series Route Processor 2

ASR1000-RP2=

Cisco ASR1000 Series Route Processor 2, Spare

Cisco ASR 1000 Series Route Processor 3

ASR1000-RP3

Cisco ASR1000 Series Route Processor 3

ASR1000-RP3=

Cisco ASR1000 Series Route Processor 3, Spare

ASR1000-RP3-32G-2P

Cisco ASR1000 Series RP3 w/ 32 GB, 2 Pack

ASR1000-RP3-64G-2P

Cisco ASR1000 Series RP3 w/ 64 GB, 2 Pack

Cisco ASR 1000 RP1 Memory

M-ASR1K-RP1-4GB

Cisco ASR1000 Series RP1 4 GB DRAM

M-ASR1K-RP1-4GB=

Cisco ASR1000 Series RP1 4 GB DRAM, Spare

M-ASR1K-HDD-40GB

Cisco ASR1000 Series RP1 40 GB HDD

M-ASR1K-HDD-40GB=

Cisco ASR1000 RP1 40 GB HDD, Spare

Cisco ASR 1000 RP2 Memory

M-ASR1K-RP2-8GB

Cisco ASR1000 Series RP2 8 GB DRAM

M-ASR1K-RP2-8GB=

Cisco ASR1000 Series RP2 8 GB DRAM, Spare

M-ASR1K-RP2-16GB

Cisco ASR1000 Series RP2 16 GB DRAM

M-ASR1K-RP2-16GB=

Cisco ASR1000 Series RP2 16 GB DRAM, Spare

M-ASR1K-HDD-80GB

Cisco ASR1000 Series RP2 80 GB HDD

M-ASR1K-HDD-80GB=

Cisco ASR1000 Series RP2 80 GB HDD, spare

M-ASR1K-EUSB-2GB=

Cisco ASR1000 Series RP2 2 GB EUSB+ FLASH, Spare

Cisco ASR 1000 RP3 Memory

M-ASR1K-RP3-8GB

Cisco ASR1000 Series RP3 8 GB DRAM

M-ASR1K-RP3-8GB=

Cisco ASR1000 Series RP3 8 GB DRAM, Spare

M-ASR1K-RP3-16GB

Cisco ASR1000 Series RP3 8 GB DRAM

M-ASR1K-RP3-16GB=

Cisco ASR1000 Series RP3 8 GB DRAM, Spare

M-ASR1K-RP3-32GB

Cisco ASR1000 Series RP3 8 GB DRAM

M-ASR1K-RP3-32GB=

Cisco ASR1000 Series RP3 8 GB DRAM, Spare

M-ASR1K-RP3-64GB

Cisco ASR1000 Series RP3 8 GB DRAM

M-ASR1K-RP3-64GB=

Cisco ASR1000 Series RP3 8 GB DRAM, Spare

M-ASR1K-SSD-100GB

Cisco ASR1000 Series RP3 100 GB SSD

M-ASR1K-SSD-100GB=

Cisco ASR1000 Series RP3 100 GB SSD, Spare

M-ASR1K-SSD-200GB

Cisco ASR1000 Series RP3 200 GB SSD

M-ASR1K-SSD-200GB=

Cisco ASR1000 Series RP3 200 GB SSD, Spare

M-ASR1K-SSD-400GB

Cisco ASR1000 Series RP3 400 GB SSD

M-ASR1K-SSD-400GB=

Cisco ASR1000 Series RP3 400 GB SSD, Spare

Cisco ASR 1000 Series USB Flash Memory Options

MEMUSB-1024FT

1 GB USB Flash Token for Cisco ASR 1000 Series

MEMUSB-1024FT=

1 GB USB Flash Token for Cisco ASR 1000 Series, Spare

Cisco Services for the Enterprise WAN Edge

Cisco and our partners help make your enterprise WAN edge deployment a success with a broad portfolio of services based on proven methodologies. We can help you establish a secure, resilient WAN architecture and successfully integrate Cisco Unified Communications, Cisco TelePresence®, security, and mobility technologies with bandwidth to support video, collaboration, branch-office solutions, and growth in alignment with your business goals. Planning and design services align technology with business goals and can increase the accuracy, speed, and efficiency of deployment. Technical services help maintain operational health, strengthen software application functions, solve performance problems, and lower expenses. Optimization services are designed to continually improve performance and help your team succeed with new technologies. For more information, visit http://www.cisco.com/go/services.

Cisco Capital

Financing to Help You Achieve Your Objectives

Cisco Capital® can help you acquire the technology you need to achieve your objectives and stay competitive. We can help you reduce CapEx. Accelerate your growth. Optimize your investment dollars and ROI. Cisco Capital financing gives you flexibility in acquiring hardware, software, services, and complementary third-party equipment. And there’s just one predictable payment. Cisco Capital is available in more than 100 countries. Learn more.

For More Information

For more information about the Cisco ASR 1000 Series RP1, RP2, and RP3, and the ASR 1000 Series, visit http://www.cisco.com/go/asr1000 or contact your local Cisco account representative.

 


上一个:ASR1000-RP3

本网站由阿里云提供云计算及安全服务 Powered by CloudDream